This article will walk you through installing Team Viewer so you can remotely access your migration workstation.

Download TeamViewer Full Client

1. Visit TeamViewer.com
   Download the TeamViewer FullClient installer.  Their website may change, but as of now, below are the Clicks to get there.
   Click Free Download  in the upper right
   
   
   
2. Scroll down and click the link Visit our download portal for additional downloads.
   
   
   
3. Scroll down on the page until you find the TeamViewer Full Client option
   Click on Download (64-bit)
   
   
   

Install TeamViewer Full Client

1. Once the installer finishes downloading, click on it to run it
   
   
   
2. Check Start TeamViewer with Windows
   Check Show advanced options
   Click Accept - next
   
   
   
3. Check Use TeamViewer VPN and click Next
   
   

Configure TeamViewer

1. Click I Accept the EULA and the DPA.
   Click Continue
   
   
   
2. Launch TeamViewer
3. Click the gear in the top right corner
   
   
   
4. In the General section, Check Start TeamViewer with Windows
   Do NOT click OK yet
   
   
   
5. Click the Advance tab and then click Show advanced options.
   
   
   
6. Scroll down until you find the Personal Password section and enter a strong password you can remember.
   Click OK
   
   

Providing Remote Access